OPTIKA IM-3MET
Satın alın OPTIKA IM-3MET ile Bitcoin, Ethereum Veya Litecoin
Fiyat:2.597,23€
Daxdi Club üyeleri için fiyat:1.818,06€
Stok:36 birimler
Bitcoin0.03416479 BTC
Ethereum1.07443 ETH
Litecoin42.454 LTC
Daxdi kulüp üyeleri için özel fiyat mevcuttur, henüz kulübün bir parçası değilseniz katılabilirsiniz burada.
Purchase currently unavailable
Sevkiyat ve teslimat
Ürünü saat 18:00'den önce satın alırsanız, ürün aynı gün içinde sevk edilecektir. (Pazar günleri dahil değildir).
Ürünler acil uluslararası sevkiyat taşıyıcıları tarafından gönderilir, en fazla 72 saat içinde ürününuz evinize ulaşacaktır.
Ürün açıklaması
OPTIKA IM-3MET INVERTED METALLOGRAPHIC MICROSCOPE
Trinocular inverted microscope for metallography, LWD MET IOS objectives, X-LED lighting
Inverted metallographic microscopes are ideal for industrial inspection of metal samples of a certain volume. With metallographic samples, it is not necessary to have a transmitted lighting system, but the incident lighting is sufficient. In addition, in metallographic microscopes the illumination is transmitted through the objectives so that the light is concentrated with maximum intensity in the area of the observed sample.
Many times, when a visual inspection of a sample has to be made, we do not have the necessary tools to make a fine cut of only a few microns in thickness to use a straight metallographic microscope. For this reason, inverted metallographic microscopes are recommended for the industrial sector.
Trinocular inverted microscope for metallography, LWD MET IOS objectives, X-LED lighting
Inverted metallographic microscopes are ideal for industrial inspection of metal samples of a certain volume. With metallographic samples, it is not necessary to have a transmitted lighting system, but the incident lighting is sufficient. In addition, in metallographic microscopes the illumination is transmitted through the objectives so that the light is concentrated with maximum intensity in the area of the observed sample.
Many times, when a visual inspection of a sample has to be made, we do not have the necessary tools to make a fine cut of only a few microns in thickness to use a straight metallographic microscope. For this reason, inverted metallographic microscopes are recommended for the industrial sector.
OPTIKA IM-3MET

